Embosser with 1 5/8 inch seal

Home

Transcript Embossers

Embosser with 1 5/8" Seal and 5-Line Layout

CODE: EMB-158-5L

List price: $38.83

Web price: $34.95

You save: $3.88 (10%)

This style embosser has no center design, just 5 lines of text. Select the pocket or desk style handle. The desk handle adds $5.00.

Description

Images

Send to friend

This 1 5/8" embosser is economical way to put your school's seal on the transcripts.

Select pocket or desk style handle.(Desk handle adds $5.00)
Select the lettering style (shown above on the "Images" tab)
Give us the text for the 5 lines. There is room for 21 characters and spaces on the top and bottom outer rings, and 14 characters and spaces on the top and bottom inner rings. The center has room for 8 characters and spaces.
Returns: We do not accept returns on personalized items. If we make an error in filling your order, we will replace it, but embossers are not returnable.
Production time: If you would like to get the embosser as quickly as possible, place an order with ONLY the embosser on it. If you do so, we will have it shipped directly to you from our vendor. The production time in this case is 3 days plus shipping.
If you put the embosser on an order with other items, we will bring it to our office first and THEN ship to you with the rest of your order. In this case, allow 2 - 3 weeks until your order goes out, plus the shipping time to get it to you.
IMPORTANT NOTE: The embosser will cause your entire order to take up to three weeks. To prevent this, place the embosser as a separate order.

Order Form for Embosser with 1 5/8" Seal and 5-Line Layout

Please give the following information, exactly as you want it to appear: (For accuracy, we copy and paste from this information, so please be precise and do not use all capital letters!)

Embosser Handle Style:

* required field

Letter Style:
Choose the typestyle for the embosser. The "Images" tab above shows the styles available.

* required field

Line 1:

Line 1 is the text for the outer ring on the top half of the embosser. (See layout sketch at top of page.)

Maximum number of Characters = 21 * required field

Line 2:

Maximum number of Characters = 21 * required field

Line 3:

Line 3 is the text for the inner ring on the top half of the embosser. (See layout sketch at top of page.)

Maximum number of Characters = 14 * required field

Line 4:

Line 4 is the text for the inner ring on the bottom half of the embosser. (See layout sketch at top of page.)

Maximum number of Characters = 14 * required field

Line 5:

Line 5 is the text for the center of the embosser. (See layout sketch at top of page.)

Maximum number of Characters = 8 * required field

Orientation:
'Orientation' describes the direction from which the embosser will be placed on the paper. There is a sketch of the orientation options on the page preceding this one; use your browser's 'Back' button to view the previous page.

* required field

Quantity:

Add to cart